Test Water for Different Suspended Particles and Chemicals

Water that is used daily for commercial or domestic purposes must be clean and free from germs. Different test water procedures are available to identify pathogens, bacteria, and pollutants that can result in serious health problems. Some of the major test water methods are discussed below:

Test Water for Chemicals:

This method is used to test water for pollutants that can cause immense harm to individuals. Water chemistry is tested for presence of arsenic, radon, and lead or other harmful substances.

Test Water for Bacteria:

This testing method is used for detecting presence of harmful bacteria that tends to develop during the springtime particularly, as the ice starts thawing. This test water method looks for fecal coliform and fecal streptococcus that remains hidden in water.

Specialized Test Water Method:

This particular water testing method looks for bacteria, minerals, and pollutants in water. Presence of slime-reducing bacteria, coliform bacteria, sulfur-reducing bacteria, and iron-reducing bacteria are also detected through this testing method.

Test Water for Pathogens:

Test water methods for pathogens look for pathogenic bacteria and coliform bacteria. Not all bacteria is harmful, in fact the good ones are retained and only the harmful variants are removed, making water safe for consumption. This testing method helps to determine usefulness of water as well.

Test Water in Laboratory:

At times water samples are sent to the laboratory for testing. This helps in testing presence of pathogens or coliform bacteria.

Different other kinds of testing methods are performed to determine presence of materials like mercury, iron, lead, arsenic, and sodium. The containers used for testing are made sterile and sealed to prevent any germs from entering into them. Containers are mostly obtainable from laboratories. It is important that before relying on a laboratory, you ensure that it complies with Environmental Protection Agency or EPA methods and standards.

It is very important to test drinking water regularly and particularly very essential in case of flood, leakage in pipes, or spills. Test water methods must be carried out once winter is over, as ice starts thawing.

Test Water for Hardness:

If you suspect that water you receive is hard water, you can rely on test water tools for determining the hardness. Test water supply companies offer kits, which give you a general idea about hardness of water. You can trust results derived from licensed water testing laboratories only.

EPA has offered guidelines for drinking water and these are the Primary Standards and the Secondary Standards.

Primary Standards are set considering health benefits. For instance, presence of high levels of lead can increase health hazards. Test water methods are used to determine presence of such harmful chemicals in water we consume.

Secondary Standards: EPA has established this particular standard on basis of taste, odor, color etc, which refers to aesthetic water quality more than the health issues.

So, to clear your mind of all kinds of doubts and health concerns, you can get in touch with labs to test water for harmful contaminants.

About the Author

Are you looking for helpful resources regarding test water procedures and specific water contamination? Look at our website to know more.

Author (Nick). Submitted on Wed, 14 Dec 2011 Time: 11:42 AM

Rating: Not yet rated

Comments

No comments posted.